These are dust covers for the trotter wheels of a harness racing assembly. One bearing dust cover was lost so we had to make a new one. There is one cover per side and they thread on to an axle as you can see int he picture of the wheel assembly. This project began on the Lathe where the piece was faced, drilled and tapped. It then continued to the CNC Milling Machine where the…
Custom machined parts with bored, drilled and tapped holes. Also assembled with set collars, guide pins, spring pins, punch pins and dies, This CNC Milling Machine Fixture project includes bored, drilled and tapped holes and is assembled with set collars, guide pins, set pins, spring pins, punch pins and dies. LIKE US ON FACEBOOK CONTACT US ABOUT YOUR PROJECT
I rebuilt an Exhaust Manifold for a Sailboat for a customer. It was made of all galvanized steel and I replace it with stainless steel. I made a custom plate with screw holes and through hose as well as counter bored hole for an angle pipe fitting in which I utilized my CNC Milling Machine for the base and the angled hole into the pipe. I used my Tig Welder to weld everything together.
With this project I had to open up the bore and cut it deeper so it would sit on top of the taper flush on the bottom on the inside of the breather.
This was an odd and challenging project. With my lathe I cut round threads on square pieces. My CNC Mill milled and cut a circle profile on the brass pieces and milled square pieces and drilled on the CNC Mill matching pieces.
